How to Apply

 How to Apply Your UV DTF Wraps

1. Prepare: Ensure the surface of your cup or object is clean, dry, and free of oils. We recommend wiping it with rubbing alcohol.
2. Squeegee: Firmly scrape the transfer with a squeegee or credit card to ensure the design adheres to the carrier sheet.
3. Peel: Carefully peel the clear carrier sheet away from the white backing. If the design stays on the backing, rub it again.
4. Place: Position the design on your surface. Note: The adhesive is very strong, so you only have one chance!
5. Press: Rub the design firmly from the center outward to remove any air bubbles.
   
6. Finish: Slowly peel off the clear carrier sheet at a sharp angle. Admire your new masterpiece!